Installation Videos

We realized installation videos are a lot better than a user manual so please enjoy these detailed videos to get your bike assembled and tuned.

Does your derailleur cable appear to be on the inside of the frame not the outside? Your bike was not routed incorrectly. It actually has to do with the way the chain was unraveled. Please follow this video to revert the derailleur to the correct side.

 

 

 Thru-Axle Conversion Kit Installation

Allen Keys needed for each bolt on the X

  • Four bolts on the stem to clamp handlebars- 4mm (torqued to rougly 5nm)
  • Two bolts that attach to the steerer tube of the fork- 5mm (torqued to rougly 5nm)
  • Seatpost collar- 5mm (torqued to rougly 5nm)
  • Saddle rails clamp- 6mm
  • Derailleur hanger- 3mm 
  • Attachment for the derailleur to the hanger- 5mm
  • Derailleur cable pinch bolt- 4mm
  • Pedals to crankarms- 15mm wrench. Rotate toward the front wheel to tighten. (Right pedal clockwise tighten, Left pedal counter-clockwise tighten). Hand thread until the very end and give final torque with the wrench. The warranty does not cover stripped crank arms.
  • Crank arm bolt that connects to bottom bracket spindle- 8mm
  • Brake caliper bolts that connect to frame and fork- 4mm
  • Brake pad adjusters- 3mm
  • Brake cable pinch bolt- 5mm

 

     

     

    X Installation Dropbar and Flatbar (box with wheels next to bike).

     

      Norton Hardtail MTB Installation

      Allen Keys needed for each bolt on the Redwood

      • Four bolts on the stem to clamp handlebars- 4mm (torqued to rougly 5nm)
      • Two bolts that attach to the steerer tube of the fork- 4mm (torqued to rougly 5nm)
      • Seatpost collar- 5mm (torqued to rougly 5nm)
      • Saddle rails clamp- 6mm
      • Derailleur hanger- 2.5mm
      • Attachment for the derailleur to the hanger- 5mm
      • Derailleur cable pinch bolt- 4mm
      • Pedals to crankarms- 15mm wrench. Rotate toward the front wheel to tighten. (Right pedal clockwise tighten, Left pedal counter-clockwise tighten). Hand thread until the very end and give final torque with the wrench. The warranty does not cover stripped crank arms.
      • Crank arm bolt that connects to bottom bracket spindle- 8mm
      • Brake caliper bolts that connect to frame and fork- 4mm
      • Brake pad adjusters- 3mm
      • Brake cable pinch bolt- 5mm
      • Bolt-on thru axles- 6mm

      Redwood Installation Dropbar and Flatbar (box with wheels next to bike).

      Longer Box with rear wheel attached for Redwood installation

      Sprout Balance Bike Installation

      Sapling Mountain Bike Installation